Picture
RG-AM5528-SF Optical i-Share+ Master Access Point
Recommended for deployment in schools, hotels, medical care, office, production workshops, etc.
Models
Series
Highlight Features
- Connection with APs through hybrid cables, realize long distance and fast transmission
- Full 2.5G downlink optical ports, fully maximizing the AP performance
- Multiple AP models allowing flexible service expansion
- AP remote power-on or power-off, eliminating the need for onsite operation
Key Specification
Ruijie All-Optical i-Share+ Solution — Master AP RG-AM5528-SF
All-optical architecture, point-to-point power supply for APs through hybrid cables
High-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades
Specifications
Solution
All-Optical Network
Hybrid Cable
Wi-Fi 6
i-Share Mode
Power On/Off of a Single AP
24 Optical Ports and 24 PoE Ports, Hybrid Cable, Maximum Transmission Distance of 1000 m
24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cables
Only one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network
2.5G Optical Ports, Eliminating the Bottleneck of Gigabit Networks and Maximizing AP Performance
Full 2.5G downlink optical ports, allowing high-speed transmission of APs
Breaking the bottleneck of wired networks and providing better wireless experience for growing service needs
Multiple AP Models, Facilitating Flexible Service Expansion
The optical i-Share master AP provides the i-Share mode, supports access of micro APs, and integrates wired and wireless coverage of intensive rooms such as dormitories and hotels.
It can also switch to the common mode, provide Layer 2 switching, realize on-demand access of the ordinary wall plate APs, indoor APs, and outdoor APs, facilitating flexible service expansion.
An O/E converter is required for connecting an conventional AP with copper ports to a master AP.
P2P Power Supply Control and Remote Power-on/Power-off,
Eliminating the Need for Onsite Operation
The 24 power supply ports correspond to the downlink power ports one by one, and support visualization of power supply per circuit on the INC.
When an AP fails, each AP can be powered on or off remotely, without performing any onsite operation.
FAQ
Tips: Product information and performance will be affected by upgrade iteration, specific
environment and
other factors, so FAQ content is for reference only. For further information, please contact
online support.
Documents
Ruijie RG-AM5528-SF All-Optical i-Share+ Master Access Point Hardware Installation and Reference Guide (V1.4)
Ruijie All Optical i-Share+ Solution Catalog
Ruijie RG-WLAN Implementation Cookbook (V4.1)
Ruijie RG-AM5528-SF Series Optical i-Share Master Access Point Release Notes, RGOS 12.5(4)B0404P1 (V1.0)
Ruijie RG-AM5528-SF Series Optical i-Share Master Access Point Firmware
RG-AM5528-SF All-Optical i-Share+ Master AP Datasheet
Ruijie RG-WLAN Series Access Points Web-based Configuration Guide, RGOS11.9(6)W3B1 (V1.0)
RG-AM5528-SF EU DOC
Ruijie RG-WLAN Series Access Points and Access Controllers Upgrade Guide (V1.0)
Specifications
Hardware Specifications
| Dimensions and Weight |
RG-AM5528-SF |
| Dimensions(W × D × H) |
Main unit: 442 mm × 315 mm × 43.6 mm (17.40 in. x 12.40 in. x 1.72 in.) Shipping: 538 mm × 438 mm × 173 mm (21.18 in. x 17.24 in. x 6.81 in.) |
| Rack height |
1 RU |
| Weight |
Main unit: 4.6 kg (10.14 lbs) Shipping: 6.38 kg (14.06 lbs) |
| Installation |
Rack-mounted |
| System Specifications |
RG-AM5528-SF |
| Switching capacity |
880 Gbps/7.92 Tbps |
| Packet forwarding rate |
426 Mpps/600 Mpps |
| Port Specifications |
RG-AM5528-SF |
| Fixed service port |
Uplink: 4 × 10G SFP+ ports, support for 1G SFP mode Downlink: 24 × 1G/2.5G SFP ports and 24 × PoE ports. Ports 1 to 20 support the PoE/PoE+ function, and each port supports up to a 30 W PoE power supply. Ports 21 to 24 support PoE/PoE+/PoE++, and each port supports up to 90 W PoE power supply. The maximum PoE output power is 480 W. |
| Fixed management port |
1 x RJ45 console port 1 x 10/100/1000Base-T adaptive MGMT port |
| Status LED |
24 x PoE power supply status indicators 24 x 1000Base-X/2500Base-X SFP port status indicator 4 x SFP+ port indicators 1 x system indicator 1 x power indicator 1 x MGMT port indicator |
| Power Supply and Consumption |
RG-AM5528-SF |
| Input power supply |
One 550 W built-in power module (AC input and DC output) ● Input voltage: 176 V AC to 240 V AC Frequency: 50 Hz to 60 Hz Rated input current: 4 A ● Output voltage: 12 V DC for the master AP and 54 V DC for the external unit |
| Max. Power consumption |
Max. power consumption: 530 W Without load: < 42 W With full load: < 530 W |
| Environment and Reliability |
RG-AM5528-SF |
| Temperature |
Operating temperature: 0ºC to 45ºC (32°F to 113°F) Note: At an altitude between 1,800 m (5,906 ft.) and 5,000 m (16,404 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F). Storage temperature: –40°C to +70°C (–40°F to +158°F) |
| Max. operating height |
5,000 m (16,404 ft.) |
| Humidity |
Operating humidity: 10% RH to 90% RH Storage humidity: 5% RH to 95% RH |
| Surge protection |
● AC power connector Differential mode: ± 6 kV Common mode: ± 6 kV ● Hybrid cable connector Differential mode: ± 2 kV Common mode: ± 6 kV |
| Fan |
Support for fan speed regulating and alarm function |
| Shock and vibration standard |
GB/T 2423 |
| Environment standard |
Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995 |
| Mean Time Between Failure (MTBF) |
69.23 years at the operating temperature of 25°C (77°F) |
Software Specifications
| Basic Function |
RG-AM5528-SF |
| Applicable software version |
RGOS12.5(4)B0404P1 or later |
| Security and Authentication |
|
| ACL |
IPv6 ACL Time range-based ACL Egress ACL based on a Layer 2 physical interface or aggregate interface Ingress ACL based on a Layer 2 physical interface or aggregate interface Egress ACL based on a Layer 3 interface Ingress ACL based on a Layer 3 interface |
| CPP |
CPU Protect Policy (CPP) |
| NFPP |
Network Foundation Protection Policy (NFPP) |
| Routing and Switching |
|
| MAC |
MAC address learning and aging Static and dynamic MAC addresses Source MAC address filtering Limitation on the number of MAC addresses learned on an interface |
| Ethernet |
Jumbo frame length: 1,518 bytes IEEE802.1p and IEEE802.1Q Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP) |
| VLAN |
Interface-based VLAN assignment Max. number of SVIs: 1,000 Max. number of VLANs: 4,094 VLAN ID range: 1 to 4,094 |
| ARP |
ARP entry aging, gratuitous ARP learning, and proxy ARP Max. number of ARP entries: 24,000 ARP check |
| IPv4 services |
Static and dynamic IPv4 addresses DHCP server and DHCP client DHCP snooping DNS client and DNS proxy NTP server, NTP client, and SNTP client |
| IPv6 services |
Static and dynamic IPv6 addresses. Neighbor Discovery (ND), IPv6 ND proxy, ICMPv6, and IPv6 ping DNSv6 client NTPv6 server and NTPv6 client |
| IP routing |
IPv4/IPv6 static routing Max. number of static IPv4 routes: 1,000 Max. number of static IPv6 routes: 1,000 Static black hole routing |
| Multicast |
Multicast-to-unicast conversion IGMP snooping |
| Network Management and Monitoring |
|
| Network management |
SNMPv1/v2c/v3 Fault detection and alarm |
| Network management platform |
Web management (Eweb) |
| User access management |
Console, Telnet, SSH, TFTP client, TFTP server, FTP server and FTP client |
Regulatory Compliance
| Regulatory Compliance |
RG-AM5528-SF |
| Regulatory compliance |
EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, ETSI EN 300 386, IEC 62368-1, and EN 62368-1 |
* For more country-specific regulatory information and approvals, contact your local sales agency.
Order Information
| Model |
Description |
| RG-AM5528-SF |
All-optical i-Share+ master AP for Ruijie O-Share Solution 24 x downlink 1G/2.5G SFP ports and 24 x PoE/PoE+ power supply ports. Four power supply ports support PoE/PoE/PoE++ power supply. 4 x uplink 10G SFP+ ports, low noise, and power supply included In i-Share mode, each master AP occupies eight wireless controller licenses. |
| RG-MAP852-SF-S |
Universal IEEE 802.11ax-compliant dual-radio wall plate micro AP for Ruijie O-Share Solution 1 x SFP port 1 x 10/100/1000Base-T Ethernet port with auto-negotiation 2.4 GHz and 5 GHz frequency bands A wireless data rate of up to 1.775 Gbps per device BOB structure One 1G optical module of the master AP |
| RG-MAP852-SF-M |
Universal IEEE 802.11ax-compliant dual-radio wall plate micro AP for Ruijie O-Share Solution 1 x 2.5G SFP port 4 x10/100/1000Base-T Ethernet ports with auto-negotiation 2.4 GHz and 5 GHz frequency bands A wireless data rate of up to 2.976 Gbps per device Support for Bluetooth Wall-mounted, ceiling-mounted, and junction box-mounted One 2.5G optical module for the micro AP and one 2.5G optical module for the master AP are delivered with this AP. |
| RG-HybridP |
The hybrid pigtails for Ruijie O-Share Solution incorporates optical fibers and copper wires. One end is the LC interface and DC connector. |
| RG-HybridBox |
The hybrid box for Ruijie O-Share Solution supports input of 24 hybrid pigtails and output of 24 hybrid cables, which is used to connect the hybrid pigtails to the hybrid cables. |
| RG-OEHC-SM-1B6A2-2x0.5-I-305 |
Indoor single-core 2 × 0.5 mm² hybrid cable, single roll, with a length of 305 m |
| RG-OEHC-SM-1B6A2-2x1.0-I-305 |
Indoor single-core 2 × 1.0 mm² hybrid cable, single roll, with a length of 305 m |
