RG-S5360-24GT4XS-E 24-Port GE Layer 3 Managed Access Switch, 4-Port 10GE Uplink

Port specifications

RG- S5360-24GT4XS-E

RG- S5360-48GT4XS-E

RG- S5360-24GT4XS-P-E

RG- S5360-48GT4XS-P-E

Fixed service port

24 x 10/100/1000BASE-T ports

4 x 1GE/2.5GE/10GE SFP+ ports

48 x 10/100/1000BASE-T ports

4 x 1GE/2.5GE/10GE SFP+ ports

24 x 10/100/1000BASE-T ports, supporting PoE/PoE+

4 x 1GE/2.5GE/10GE SFP+ ports

48 x 10/100/1000BASE-T ports, supporting PoE/PoE+

4 x 1GE/2.5GE/10GE SFP+ ports

Module slot

2 x power module slots

Power module

PA70IB

PA600IP-F

PA1000IP-F

(supporting mixed insertion)

Fixed management port

1 x RJ45 console port

USB

1 x USB 2.0 port

System specifications

RG- S5360-24GT4XS-E

RG- S5360-48GT4XS-E

RG- S5360-24GT4XS-P-E

RG- S5360-48GT4XS-P-E

System packet forwarding rate*1

115 Mpps

158 Mpps

115 Mpps

158 Mpps

System switching capacity*2

154 Gbps

211 Gbps

154 Gbps

211 Gbps

CPU

Dual-core CPU, each core with the clock speed of 1.0 GHz

Real-time clock (RTC)

Supported

BootROM

16 MB (storing boot software for 1+1 boot redundancy)

Flash memory

512 MB

Memory

1GB DDR4

Switch buffer

4 MB

Number of MAC addresses

16,000

ARP table size

4,000

ND table size

4,000

Number of IPv4 unicast routes

6,000

Number of IPv4 multicast routes

1,000

Number of IPv6 unicast routes

2,000

Number of IPv6 multicast routes

750

Number of ACEs

Ingress: 1,750

Egress: 800

Number of IGMP groups

1,000

Number of MLD groups

750

Number of VSU members

4

Power supply and consumption

RG- S5360-24GT4XS-E

RG- S5360-48GT4XS-E

Power supply

2 x pluggable power modules

Power module redundancy

1+1 redundancy

Power input

RG-PA70IB (AC input):

Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz

Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz

Maximum input current: 2 A

Maximum output power

RG-PA70IB: 70 W

Maximum power consumption

25 W

30 W

Energy saving

Supported

Power supply and consumption

RG- S5360-24GT4XS-P-E

RG- S5360-48GT4XS-P-E

Power supply

2 x pluggable power modules

Power module redundancy

Only when the PoE load of the whole device is less than PoE output power of single power supply and dual power supplies are used, redundancy is supported.

Power input

RG-PA600I-P-F (AC input):

● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz

● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz

● Maximum input current: 8 A

RG-PA1000I-P-F (AC input 1):

● Rated input voltage: 100 V AC to 130 V AC, 50/60 Hz

● Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz

● Maximum input current: 12 A

RG-PA1000I-P-F (AC input 2):

Rated input voltage: 200 V AC to 240 V AC, 50/60 Hz

Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz

Maximum input current: 8 A

Maximum output power

RG-PA600I-P-F: 600 W

RG-PA1000I-P-F:

100 V AC to 130 V AC: 930 W

200 V AC to 240 V AC: 1000 W

Note: When the ambient temperature is higher than 55°C (131°F), the maximum output power is reduced by 50%.

PoE port

Ports 1 to 24 support PoE/PoE+ (IEEE802.3af/at) power supply

Ports 1 to 48 support PoE/PoE+ (IEEE802.3af/at) power supply

PoE power cable pairs

Mode A (1-2, 3-6 pairs)

PoE output power

Each PoE port provides up to 30 W of power.

The maximum power depends on the configured power supply.

1 x RG-PA600I-P-F: 370 W

2 x RG-PA600I-P-F: 740 W;

1 x RG-PA1000I-P-F: 740 W;

2 x RG-PA1000I-P-F: 1480 W;

a maximum output of 720 W over 24 ports (30 W x 24)

Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device.

Each PoE port provides up to 30 W of power.

The maximum power depends on the configured power supply.

1 x RG-PA600I-P-F: 370 W

2 x RG-PA600I-P-F: 740 W;

1 x RG-PA1000I-P-F: 740 W;

2 x RG-PA1000I-P-F: 1480 W;

a maximum output of 1440 W over 48 ports (30 W x 48)

Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device.

Maximum power consumption

35 W (without PoE load)

750 W (full PoE load)

45 W (without PoE load)

1485 W (full PoE load)

Energy saving

Supported

Dimensions and weight

RG- S5360-24GT4XS-E

RG- S5360-48GT4XS-E

RG- S5360-24GT4XS-P-E

RG- S5360-48GT4XS-P-E

Unit dimensions (W x D x H)

442mm x 420 mm x 43.6 mm (17.40 in. x 16.53 in. x 1.72 in.)

Rack height

1 RU

Unit weight

4.4 kg (9.70 lbs)

4.4 kg (9.70 lbs)

4.2 kg (9.26 lbs)

4.9 kg (10.80 lbs)

Mounting

Mounting on a workbench or in a rack (cabinet)

Environment and reliability

RG- S5360-24GT4XS-E

RG- S5360-48GT4XS-E

RG- S5360-24GT4XS-P-E

RG- S5360-48GT4XS-P-E

Temperature

Operating temperature: 0°C to 45°C (32°F to 113°F) at an altitude range of 0 m to 1,800 m (0 ft. to 5,905.51 ft.)

Note: At an altitude between 1,800 m (5,905.51 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Operating temperature: -40°C to +65°C (-40°F to +149°F) at an altitude range of 0 m to 1,800 m (0 ft. to 5,905.51 ft.)

Note: At an altitude between 1,800 m (5,905.51 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Operating temperature: -40°C to +65°C (-40°F to +149°F) at an altitude range of 0 m to 1,800 m (0 ft. to 5,905.51 ft.)

Note: At an altitude between 1,800 m (5,905.51 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).

When three or four 80-km long-reach optical transceivers are configured, the operating temperature range is –40°C to +50°C (–40°F to +122°F).

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Humidity

Operating humidity: 10% to 90% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

Altitude

Operating altitude: -500 m to +5,000 m (-1640.42 ft. to +16,404.20 ft.)

Storage altitude: -500 m to +5,000 m (-1640.42 ft. to +16,404.20 ft.)

Mean time between failure (MTBF)

207,962 hours (about 23 years)

208,926 hours (about 23 years)

209,714 hours (about 23 years)

200,253 hours (about 22 years)

Fan

Fanless

2x fixed fan module

Heat dissipation

Fanless design, natural cooling

Left-to-rear, front-to-rear

Acoustic noise

SPL: fanless, quiet, < 20 dB

SPL at ambient temperature of 27°C (80.6°F): 36 dB

SPL at ambient temperature of 27°C (80.6°F): 36 dB (30% PoE load, 2 RG-PA1000I-P-F power modules, adjusted fan speed)

SPL at ambient temperature of 27°C (80.6°F): 36 dB (30% PoE load, 2 RG-PA1000I-P-F power modules, adjusted fan speed)

Power module hot swapping

Supported

USB hot swapping

Supported

Cable hot swapping

Supported by all ports

Fan monitoring

Fanless design

PID-based multi-level speed adjustment

Fan speed control (manual configuration not supported)

Fan failure alarming

Temperature monitoring

Supported

ESD

ESD contact/air discharge: 6 kV/8 kV

ESD susceptibility contact/air discharge: 8 kV/15 kV

Surge protection

Service port: common mode 10 kV

Power port: common mode 6 kV, differential mode 6 kV

Certifications and regulatory compliance

RG- S5360-24GT4XS-E

RG- S5360-48GT4XS-E

RG- S5360-24GT4XS-P-E

RG- S5360-48GT4XS-P-E

Safety regulation

IEC 62368-1

EMC regulation

EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11

RoHS

European RoHS Directive 2011/65/EU & Amendment(EU) 2015/863

RG-S5360-E Series

Feature

Description

Ethernet switching

Jumbo frame (maximum length: 9,216 bytes)

IEEE 802.3az EEE

IEEE 802.1Q (4,000 VLANs)

Voice VLAN

Super VLAN and private VLAN

MAC address-based VLAN, interface-based VLAN, protocol-based VLAN, and IP subnet-based VLAN

GVRP

Basic QinQ

Selective QinQ

STP, RSTP, and MSTP

ERPS (G.8032)

LLDP/LLDP-MED

IP service

ARP

DHCP client, DHCP relay, and DHCP server

DHCP snooping

DNS

DHCPv6 client, DHCPv6 relay, and DHCPv6 server

DHCPv6 snooping

Neighbor Discovery (ND) and ND snooping

IP routing

Static routing

RIP and RIPng

OSPFv2 and OSPFv3

BGP4 and BGP4+

IPv4 and IPv6 VRF

IPv4 and IPv6 PBR

Multicast

IGMP v1/v2/v3, and IGMP proxy

IGMP v1/v2 snooping

PIM-DM, PIM-SM, and PIM-SSM

MSDP

MLD v1/v2

MLD snooping v1/v2

PIM-SMv6 and PIM-SSM v6

ACL and QoS

Standard IP ACLs

Extended IP ACLs

Extended MAC ACLs

Time-based ACLs

Expert-level ACLs

ACL80

IPv6 ACL

ACL redirection

Traffic rate limiting on an interface

Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ

Congestion avoidance: tail drop

802.1p/DSCP/ToS traffic classification

Eight priority queues per interface

Security

Multiple AAA modes

RADIUS and TACACS+

Interface-based and MAC address-based 802.1x authentication

Web authentication

HTTPS

SSHv1 and SSHv2

Global IP-MAC binding

Port isolation and port security

IP source guard

SAVI

CPP and NFPP

Reliability

REUP, RLDP, DLDP

IPv4 VRRP v2/v3 and IPv6 VRRP

BFD

Link tracing, fault notification, and remote loopback based on 802.3ah (EFM)

Dual-boot redundancy

Fan speed adjustment

Fan fault alarm

Device virtualization

Virtual Switching Unit (VSU)

NMS and maintenance

SPAN, RSPAN

sFlow

NTP and SNTP

FTP and TFTP

SNMP v1/v2/v3

RMON (1, 2, 3, 9)

NETCONF

CWMP (TR-069)

gRPC

PoE

RG-S5360-E-24GT4XS-P-E, and RG-S5360-E-48GT4XS-P-E:

IEEE 802.3af and 802.3at

Warm start

Interface priority