Compare Products

Hide

Clear All

VS

Picture
Sales Enquiry
Key Specification View More
Features

Designed for Beach
Ruijie Cloud Managed Series Outdoor AP RG-AP680-L

Port

Dimensions

Max. Data Rate 2.976 Gbps

4 Spatial Streams

IP68 Rating

DC/PoE Power Supply

Free Cloud Management

Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments

Corrosion Protection

IP68 Rating

6 kV Lightning Protection

Wide Temperature Range

Comply with salt spray prevention standards, ensuring stable running in saline, warm and humid environment.

Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments

Corrosion Protection

Comply with salt spray prevention standards, ensuring stable running in saline, warm and humid environment.

Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments

IP68 Rating

IP68 rating protection against dust and water, avoiding liquid and sand intrusion.

Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments

6 kV Lightning Protection

Built-in high-standard lightning protectors, defending against 6 kV surge and ensuring stable running in bad weather such as thunderstorms.

Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments

Wide Temperature Range

Operating in the range of –40°C to +65°C, adapting to clod weather in the northern regions.

Omnidirectional Antennas with 360° Coverage to Every Corner

Equipped with 28 dBm omnidirectional antennas with high transmit power
Extending coverage to every corner within 360° and up to 300 m in radius
Good signal coverage for STAs around the AP (including the rear side)
Applicable to outdoor environments where STAs are dispersed

*The maximum range of Wi-Fi coverage is calculated based on field tests. The real transmission range may vary, according to the environment, receiving device, etc.

Wi-Fi 6 AX3000

Achieving a combined data rate of up to 2.976 Gbps

2.976
Gbps

High Concurrency
OFDMA and MU-MIMO are introduced to
ensure stable access of multiple STAs

Low Latency
OFDMA is applied to transmit data to
multiple STAs simultaneously. The latency
is as low as 20 ms.

High Security
The next-generation wireless encryption
protocol WPA3 greatly improves the

High Speed
With 1024-QAM modulation, the data
transmission rate is 25% higher than
802.11ac.

Cloud, Make Your Business Easy

  • Remote monitoring
  • Remote Wi-Fi management
  • Cloud portal authentication
  • Wireless intelligent optimization
Specifications

Hardware Specifications

Dimensions and Weight

RG-AP680-L

Unit dimensions

(W x D x H)

251 mm x 168 mm x 64 mm (9.88 in. x 6.61 in. x 2.52 in.)

Shipping dimensions

(W x D x H)

405 mm x 232 mm x 325 mm (15.94 in. x 9.13 in. x 12.79 in.)

Unit weight

Main unit: 1.0 kg (2.20 lbs)

Mounting bracket: 0.9 kg (1.98 lbs)

Shipping weight

3.15 kg (6.94 lbs)

Mounting

Ceiling/Pole-mount (a mounting bracket is delivered with the main unit)

 

Wi-Fi Radio

RG-AP680-L

Radio design

Dual-radio and four spatial streams:

● Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO

● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO

Operating frequencies

Radio 1: 802.11b/g/n/ax

● 2.400 GHz to 2.483 GHz, channels 1 to 13

Radio 2: 802.11a/n/ac/ax

● 5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48

● 5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64

● 5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140

● 5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165

Note: Country-specific restrictions apply.

Data rates

Combined peak data rate: 2.976 Gbps

Radio 1: 2.4 GHz, 574 Mbps

● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max.)

● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)

Radio 2: 5 GHz, 2.402 Gbps

● Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (max)

● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)

● Two spatial stream Multi-User (MU) MIMO for up to 2.402 Gbps wireless data rate to up to two 1SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max)

● Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

● 802.11b: 1, 2, 5.5, 11

● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ac: 6.5 to 400 (MCS0 to MCS9, NSS = 1 to 2,VHT20 to VHT40)

● 802.11ax: 8.6 to 575 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz radio

● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ac: 6.5 to 1732 (MCS0 to MCS9, NSS = 1 to 2,VHT20 to VHT160)

● 802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)

Packet aggregation

802.11n/ac/ax : A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antenna (two 2.4 GHz antennas and two 5 GHz antennas)

Max. antenna gain

2.4 GHz radio: 2.9 dBi

5 GHz radio: 4.9 dBi

Max. transmit power

2.4 GHz radio: 28 dBm (25 dBm per chain)

5 GHz radio: 28 dBm (25 dBm per chain)

Note: The transmit power is limited by local regulatory requirements.

Thailand
2.400 GHz to 2.4835 GHz: 20 dBm
5.470 GHz to 5.725 GHz: 30 dBm
5.725 GHz to 5.825 GHz: 30 dBm

Peru
2.400 GHz to 2.4835 GHz: EIRP ≤ 36dBm
5.150 GHz to 5.250 GHz: EIRP ≤ 23dBm
5.250 GHz to 5.350 GHz: EIRP ≤ 30dBm
5.470 GHz to 5.725 GHz: EIRP ≤ 30dBm

Power increment

Configurable in increments of 1 dBm

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

 

The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Wi-Fi Radio

Frequency Performance

RG-AP680-L

Frequency Band and Protocol

Data Rate

Max. Transmit Power per Transmit Chain

Max. Receive Sensitivity per Receive Chain

2.4 GHz 802.11b

1 Mbps

25 dBm

-92 dBm

2 Mbps

25 dBm

-82 dBm

5.5 Mbps

25 dBm

-84 dBm

11 Mbps

25 dBm

-78 dBm

2.4 GHz 802.11g

6 Mbps

25 dBm

-84 dBm

24 Mbps

23 dBm

-74 dBm

36 Mbps

23 dBm

-72 dBm

54 Mbps

20 dBm

-67 dBm

2.4 GHz 802.11n (HT20)

MCS0

25 dBm

-84 dBm

MCS7

20 dBm

-66 dBm

2.4 GHz 802.11n (HT40)

MCS0

25 dBm

-79 dBm

MCS7

20 dBm

-63 dBm

2.4 GHz 802.11ax (HE20)

MCS0

25 dBm

-84 dBm

MCS11

18 dBm

-54 dBm

2.4 GHz 802.11ax (HE40)

MCS0

25 dBm

-80 dBm

MCS11

18 dBm

-51 dBm

5 GHz 802.11a

6 Mbps

25 dBm

-84 dBm

24 Mbps

23 dBm

-74 dBm

36 Mbps

23 dBm

-72 dBm

54 Mbps

20 dBm

-67 dBm

5 GHz 802.11n (HT20)

MCS0

25 dBm

-84 dBm

MCS7

20 dBm

-66 dBm

5 GHz 802.11n (HT40)

MCS0

25 dBm

-81 dBm

MCS7

20 dBm

-63 dBm

5 GHz 802.11ac (VHT20)

MCS0

25 dBm

-84 dBm

MCS9

19 dBm

-61 dBm

5 GHz 802.11ac (VHT40)

MCS0

25 dBm

-81 dBm

MCS9

19 dBm

-56 dBm

5 GHz 802.11ac (VHT80)

MCS0

25 dBm

-78 dBm

MCS9

19 dBm

-53 dBm

5 GHz 802.11ax (HE20)

MCS0

25 dBm

-84 dBm

MCS11

18 dBm

-54 dBm

5 GHz 802.11ax (HE40)

MCS0

25 dBm

-81 dBm

MCS11

18 dBm

-51 dBm

5 GHz 802.11ax (HE80)

MCS0

25 dBm

-78 dBm

MCS11

18 dBm

-48 dBm

5 GHz 802.11ax (HE160)

MCS0

25 dBm

-73 dBm

MCS11

18 dBm

-43 dBm

 

Bluetooth Radio

RG-AP680-L

Bluetooth

Bluetooth 5.0

iBeacon Bluetooth, applied to Bluetooth locating and Bluetooth applications

Antenna type

Integrated omnidirectional antenna

Max. antenna gain

5 dBi

Max. transmit power

10 dBm

Receive sensitivity

-88 dBm (@BLE)

 

Ports

RG-AP680-L

Fixed service port

1 x 10/100/1000Base-T Ethernet port with auto-negotiation, compliant-with IEEE 802.3af/802.3at standard

1 x GE SFP port

Fixed management port

1 x RJ45 console port (serial console port)

Status LED

1 x multi-color system status LED

3 x single-color RSSI LEDs

Button

1 x Reset button

● Press the button for shorter than 2 seconds. Then the device restarts.

● Press the button for longer than 5 seconds. Then the device restores to factory settings.

 

Power Supply and Consumption

RG-AP680-L

Input power supply

The AP supports the following two power supply modes:

● 48 V DC/0.35 A power input over DC connector: The DC connector accepts 2.0 mm/6.3 mm center-positive circular plug. A DC power adapter needs to be purchased independently.

● PoE input over ETH/PoE: The power source equipment (PSE) complies with IEEE 802.3af/at standard (PoE/PoE+).

Note:

● If both DC power and PoE are available, DC power is preferred.

Power consumption

Max power consumption: 12.95 W

● DC powered: 12.95 W

● PoE powered (802.3af): 12.95 W

● PoE+ powered (802.3at): 12.95 W

● PoE++ powered (802.3bt): 12.95 W

● Idle mode: 6.0 W

 

Environment and Reliability

RG-AP680-L

Temperature

Operating temperature: –40°C to +65°C (–40°F to +149°F)

Storage temperature: –40°C to +85°C (–40°F to +185°F)

Note: At an altitude between 3,000 m (9,843 ft.) and 5,000 m (16,404 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity: 0% to 100% RH (non-condensing)

Storage humidity: 0% to 100% RH (non-condensing)

IP rating

IP68

Mean Time Between Failure (MTBF)

> 250,000 hours

 

Regulatory Compliance

RG-AP680-L

Regulatory compliance

EN 55032

EN 55035

EN 61000-3-3

EN IEC 61000-3-2

EN 301 489-1

EN 301 489-3

EN 301 489-17

EN 300 328

EN 301 893

EN 300 440

FCC Part 15

EN IEC 62311

IEC 62368-1

EN 62368-1

IEC 60950-22

*For more country-specific regulatory information and approvals, contact your local sales agency.

 

Software Specifications

Applicable Software Version

RG-AP680-L

Applicable software version

RGOS11.9(6)W3B3 or later

 

WLAN

RG-AP680-L

Recommended max number of active devices per AP

64

Max number of associated clients

1024

Note

The number of associated clients varies according to the environment.

Max. number of BSSIDs

32 (up to 16 BSSIDs per radio)

STA management

SSID hiding

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.

Remote intelligent perception technology (RIPT)

Intelligent client identification technology

Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming

 

Security

RG-AP680-L

Authentication and encryption

Remote Authentication Dial-In User Service (RADIUS)

PSK, web, 802.1x and MSCHAPv2 authentication

QR code-based guest authentication (used with the RG-WS series wireless access controller)

SMS authentication (used with the RG-WS series wireless access controller)

MAB authentication (used with the RG-WS series wireless access controller)

Data encryption: WPA-TKIP, WPA-PSK, WPA2-AES, WEP (64/128-bit)

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist

ACL

Dynamic ACL assignment

CPP

Supported

NFPP

Supported



Routing and Switching

RG-AP680-L

IP service

Static IPv4 address and DHCP-assigned IPv4 address

NAT, FTP ALG, DNS ALG

Multicast

Multicast-to-unicast conversion

IPv6 basics

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping

IPv6 DHCP client

IP routing

IPv4/IPv6 static routing

VPN

PPPoE client

IPsec VPN

 

Management

RG-AP680-L

Network management

Fault inspection and alarm

Information statistics and logging

Network management platform

Web-based management (Eweb)

User access management

Telnet, SSH, SNMP , and TFTP-based management

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.

When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.

When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Show More
Resources All Resources
Learn about Products or Solutions
Installation
Order Information

Model

Description

RG-AP680-L

Wi-Fi 6 dual-radio wireless access point

Compliance with IEEE 802.11a/b/g/n/ac and 802.11ax standards

Built-in omnidirectional antennas

Up to four spatial streams

Data rate of up to 2.976 Gbps

Fat/Fit/Cloud mode switchover

Electrical and optical uplink ports

IEEE 802.3af/at-compliant (PoE/PoE+) power supply and DC power supply (48 V/0.35 A)

Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Submit
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contact Us

Contact Us

How can we help you?

Contact Us

Get an Order help

Contact Us

Get a tech support

2024 Ruijie Networks Brand Awareness Survey

Your opinions and feelings are crucial for our improvement.

Fill in the survey